Macrom Extreme series Manuel d'utilisateur Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 18
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
SPECIFICATIONS:
IHF Power 550 W
RMS Power at 14.4 V 2 X 200 W @ 2
2 X 120 W @ 4
Bridged power 400 W @ 4
Frequency response 10 Hz-50 kHz (+0 -1 dB)
Signal to Noise Ratio 100 dB
Input sensitivity/Impedance 200-4,000 mV/22 kohms
Total harmonic distortion 0.08 %
Dimensions 212 x 65 x 355 mm
SPECIFICATIONS:
IHF Power 250 W
RMS Power at 14.4 V 2 X 120 W @ 2
2 X 60 W @ 4
Bridged power 200 W @ 4
Frequency response 10 Hz-60 kHz (+0 -1 dB)
Signal to Noise Ratio 100 dB
Input sensitivity/Impedance 200-4,000 mV/22 kohms
Total harmonic distortion 0.08 %
Dimensions 212 x 65 x 225 mm
SP 2.100
SP 2.050
SP 4.050
2 OR 1 CHANNEL
For maximum flexibility, may be used as a subwoofer amp in a one channel configuration or a two channel amp in stereo configuration.
VARIABLE ELECTRONIC CROSSOVER (LOW PASS OR HIGH PASS)
For fine-tuning and flexibility (continuously variable 30 to 600 Hz, 12 dB/Oct.).
2 (STEREO) AND 4 (BRIDGED) COMPATIBLE
TRIMODE AVAILABLE
For two satellites and one sub with the
same amp (but in passive
mode).
GOLD PLATED CONNECTORS
To avoid oxidation and preserve the original sound quality
over the years.
TRIPLE PROTECTION
(Thermal, short circuit, low impedance) for security and reliability.
DC/DC MOSFET POWER SUPPLY
For greater efficiency and reliability.
SPECIFICATIONS:
IHF POWER 500 W
RMS Power at 14.4 V 4 X 90 W @ 2
4 X 60 W @ 4
Bridged Power 2 X 180 W @ 4
Frequency response 10 Hz-50 kHz (+0 -1 dB)
Signal to Noise Ratio > 100 dB
Total harmonic distortion 0.08 %
Input sensitivity/Impedance 200-4,000 mV/22 kohms
Trimode/Mixed mono operation 3/2/1 channel
Dimensions 212 x 65 x 355 mm
4, 3 OR 2 CHANNELS
For maximum flexibility.
2 (STEREO) AND 4 (BRIDGED) COMPATIBLE
CONTINUOUSLY VARIABLE 12 DB/OCT LOW PASS OR HIGH PASS CROSSOVER
For fine tuning and flexibility (continuously variable from 30 to 600 Hz, 12 dB/Oct).
YOU CAN CONNECT THE AMP WITH 2 OR 4 RCA INPUTS
The gain controls are still independent whether using 2 or 4 RCA imputs.
MOSFET POWER SUPPLY
For extreme efficiency and reliability.
GOLD PLATED CONNECTORS
To avoid oxidation and to preserve the original sound
quality over the years.
TRIPLE PROTECTION
(Thermal, short circuit, low impedance) for security
and reliability.
1110
macrom1999 332 5/09/01 16:13 Page 6
Vue de la page 5
1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Commentaires sur ces manuels

Pas de commentaire