Macrom M-OF7020 Instructions d'exploitation télécharger pdf (Page 23)

Device connections

Important notes for installation

Perform the electrical connections required::

1. Connect the original Fakra connector to supplied Fakra-ISO cable.

2. Connect the CanBus interface to “CAN BOX” cable.

3. Connect the antenna to the “RADIO ANT” input.

If the vehicle is equipped with double antenna, use the supplied antenna adapter.

4. Connect the supplied GPS antenna to the “GPS antenna” input.

Pay close attention to the positioning of the antenna, the optimum location is the area of the

windshield behind the rearview mirror.

Tip

The label for the GPS antenna must be directed toward the cabin, while the shell of black plastic

to the outside of the car.

5. If the car is equipped with the original Media-IN input (USB + AUX IN):

- Connect the original Fakra Quad to the USB input on the unit.

- Connect the “AUX IN L” and “AUX IN R” cables (Fakra-ISO cable) to the “AUX IN L” and

“AUX IN R” on the back of the unit.

If the car is not equipped with Media-IN input (USB + AUX IN):

- Connect the supplied USB cable to the “USB” input on the unit.

- Verify that the USB cable is accessible from the dashboard or glove compartment box.

6. Connect the supplied iPod/iPhone cable to the “IPOD / IPHONE” USB+Jack input.

Verify that the iPod/iPhone cable is accessible from the dashboard or glove compartment box.

7. Connect the rear view camera cable to the dedicated video input (not supplied).

- Before plugging the unit into the dashboard, verify operation.

- Remove the two screws on the top of the unit, otherwise you can not enter the CD / DVD.

- Install this unit in the dashboard and x the product with screws.

- Fix the outer frame.

- If you are unsure of how to properly install the unit, contact a qualied technician.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

Pas de commentaire

Macrom M-OF7020 Instructions d'exploitation Page 23